products

Zhuhai Bus Xiangrui Yineng Tire Management System Use Case

Publish Time: 2024-11-08
Zhuhai Public Transport Group operates more than 2,400 buses. In 2015, more than 1,200 first-generation tire pressure monitoring systems of Xiangrui Yineng were installed. From 2020 to 2023, more than 340 new vehicles were installed with Xiangrui's second-generation automatic positioning tire pressure monitoring system. The operational safety of the vehicle is improved, and vehicle management is more energy-saving, convenient and efficient.

Product name: Six-wheel automatic positioning tire pressure monitoring system for commercial vehicles

I. Product introduction

The six-wheel automatic positioning tire pressure monitoring system for commercial vehicles consists of a receiver, a sensor, a GPS, a front axle, a rear axle controller and four locators. The receiver is mainly used to receive the air pressure and temperature in the tire in real time, as well as the setting of tire pressure function parameters. After the sensor collects the pressure and temperature data in the tire, it is sent to the intelligent controller in the form of wireless radio frequency, and then sent to the receiver by the intelligent controller. After being received and processed by the receiver, it is displayed on the display. When the pressure or temperature in the tire is higher or lower than the preset alarm threshold, the receiver will automatically complete the corresponding alarm to remind the user to pay attention to the tire status. Through the operation of this system, the comfort of the vehicle can be improved, tire blowouts can be prevented, fuel consumption can be reduced, tire wear can be reduced, and power performance can be indirectly improved.

II. Applicable models

Applicable to commercial vehicles such as buses, coaches, freight trucks, etc. with tire pressure within 14Bar and six wheels.

III. Installation diagram


IV. System features

1. Automatic positioning of 6 wheels can be achieved without distinguishing the sensor installation position.

2. Strong signal reception reliability.

3. Tire pressure and temperature data can be refreshed within 0.5 minutes after power-on (no vehicle driving update required).

4. The whole system is completed independently. And supports multiple data outputs: 1 serial port output, 1 CAN output.

5. Combined with the background, it can fully realize the diagnosis and precise maintenance of all components of the system.

6. GPS positioning, you can view the vehicle status in real time in the background and realize background management.

V: System screenshot




×

Contact Us

captcha